Shanghai New Fiber Instrument Co., Ltd.
 

  Chinese

About us
Contact
 
 
  Home   Products  About us   Contact

  Products -> Testers for measuring the fiber 
 

XG-1A Engineering Fiber Tensile Tester

 
   

   Introduction

      The XG-1A Engineering Fiber Tensile Tester is used to implement the tensile test of engineering staple fibers with the length less than 6 mm. The fiber diameter, measured with the XGD-1 Fiber Diameter Tester, is input into the apparatus to calculate the tensile strength per unit cross-section area of the fiber. The unit of strength and modulus is MPa.

   Technical Data

(a) Force measurement range:  0100 cN

(b) Force error:  ≤±1%

(c) Force precision:  0.01 cN

(d) Extension measurement range:  100 mm

(e) Extension error:  0.05 mm

(f) Elongation precision: 0.1%

(g) Test speed:  1100, and 2200 mm/min

(h) Lower clamp moving range:  100 mm

(I) Power:   220V~±10%

(J) Weight:  45kg

     (k) Size:      540×434×560 mm
 
Contact | About us

    Maker of textile testing equipment for 20 years, Automatic linear density, crimp and tensile tester for single fiber,

    Single fiber linear density- (fineness) and tensile tester, Automatic single fiber shrinkage tester.

    Shanghai New Fiber Instrument Co., Ltd.   . Tel: 86-13916600393 (Peace Tao)    

     Email: sh62832493@163.com  Copyright(C)2005-2019,All Rights Reserved
秒速赛车 秒速赛车 秒速赛车 秒速赛车 秒速赛车 秒速赛车 秒速赛车 秒速赛车 秒速赛车 秒速赛车